so you don't need a laminating machine

(A6) with rounded corners

where they are put together calmly and slowly with 2 hands and where the magnetism is not allowed to control the coupling of the magnets

hanging up moskito nets etc

Forsænket pottemagnet, Ø20 mm. - Neodymium engros so you don't need aPot magnet 20 mm. with counterbore hole for screws with a normal round screw head (you cannot use countersunk screws with this magnet type). The difference between a counterbore and a countersunk pot magnet is that the screw goes further into the hole on a counterbore pot magnet, as there is room for a larger screw head. It is important for the strength of a magnet that the surface is completely flat, and with a counterbore magnet with a large hole